A Leather Cord with a Metal Heart

#v12710

Attach a heart onto a piece of leather cord using an oval jump ring. Knots are tied between the other beads. Finish with an adjustable knot.

#v12710
Prévenez-moi
Sélectionnez des produits pour cette idée

{{ optionsGroup.label }}

{{ getVariantsButtonText(option) }}
   
 
 
   
 
 
   
 
 
   
 
 
   
 
 
Prix ​​total
{{ getFormattedBundlePrice() }}

{{ getRewardMessage() }}

Guide step %d
1.   Cut a piece of 2mm leather cord measuring approx. 130cm and thread on two beads. Tie knots before and after the bead so they stay in place.
Guide step %d
2.   Attach a large heart onto the cord right between the knots using an oval jump ring.
Guide step %d
3.   Arrange the two ends of the cord parallel and make an adjustable knot in each side. See the technique below.
Guide step %d
A.   Arrange the two long ends parallel and make an adjustable knot in each side individually. Make a loop with one end of the cord and twist this end around itself and the other cord three to five times.
Guide step %d
B.   Now push the end of this cord through the loops – also through the first loop.
Guide step %d
C.   Now pull the end of the cord and the loops will lie flat and tight around the two cords.
Guide step %d
D.   Cut the end of the cord off close to the knot. Glue it onto the loops. Take care not to glue it onto the cord on which it is intended to slide.
Allez aussi explorer dans
Retour
Je fais mes courses comme
Continuer comme guest
Les avantages à se connecter

✔ Votre liste de souhaits personnelle

✔ L’historique de vos commandes

✔ Paiement facile
Les avantages à se connecter

✔️ Vos prix spéciaux

✔️ Des produits réservés aux professionnels

✔️ L’univers marketing B2B
Les avantages à se connecter

✔ Des contenus spécialement conçus pour vous

✔ Vos prix spéciaux
Copyright © 2024 | CreaVea | 70 Avenue de Clichy | 75017 Paris | France | +33 800 90 91 01 | service-client@creavea.com