Nouveauté
D'idées créatives
Comment réaliser la technique du bol pincé avec de l'argile autodurcissante
#v16103
L'argile autodurcissante est idéale pour le modelage à la main en utilisant la technique du bol pincé. Cette technique peut être utilisée pour fabriquer des plateaux, des bols et des vases avec ou sans pieds. Laissez sécher les articles finis pendant 24 à 48 heures avant de les peindre.
#v16103
Comment faire
1 
Pétrissez bien l'argile et ramollissez-la dans vos mains, en la roulant en boule.
Pétrissez bien l'argile et ramollissez-la dans vos mains, en la roulant en boule.2 
Make a hole in the ball by pushing your thumb into the middle of the clay ball, keeping 2-3 fingers on the outside of the ball.
Make a hole in the ball by pushing your thumb into the middle of the clay ball, keeping 2-3 fingers on the outside of the ball. 3 
Pinch further to thin the walls evenly.
Pinch further to thin the walls evenly.4 
Smooth the clay with a bit of water on your fingers.
Smooth the clay with a bit of water on your fingers.5 
If you pinch the edge of the bowl higher, you will get a deeper bowl.
If you pinch the edge of the bowl higher, you will get a deeper bowl.6 
Shape the vase by pinching the edge higher and finish by pinching the edge slightly outwards.
Shape the vase by pinching the edge higher and finish by pinching the edge slightly outwards.7 
If you make a thick base, then you will be able to model small legs at the bottom using your thumb and your index finger to pinch the clay.
If you make a thick base, then you will be able to model small legs at the bottom using your thumb and your index finger to pinch the clay.8 
Leave the finished items dry for 24-48 hours. A tip: If cracks appear in the pottery once dry, you can repair these by mixing a small amount of clay with a bit of water to a creamy consistency. Fill the crack with the mixture, preferably with a brush. Leave to dry. The repaired area can be sanded smooth with a sanding sponge or with fine sandpaper.
Leave the finished items dry for 24-48 hours. A tip: If cracks appear in the pottery once dry, you can repair these by mixing a small amount of clay with a bit of water to a creamy consistency. Fill the crack with the mixture, preferably with a brush. Leave to dry. The repaired area can be sanded smooth with a sanding sponge or with fine sandpaper.9 
Once hardened, the surface may be sanded smooth and painted with craft paint.
Once hardened, the surface may be sanded smooth and painted with craft paint.Allez aussi explorer dans
