Une écharpe de feutrage humide

#v1483

La laine est placée, en motif de grille, sur la doublure en tissu. Elle est humidifiée avec de l'eau et du savon puis feutrée à la main. Terminez le feutrage au sèche-linge ou à la machine à laver.

#v1483
Sélectionnez des produits pour cette idée

{{ optionsGroup.label }}

{{ getVariantsButtonText(option) }}
   
 
 
   
 
 
   
 
 
   
 
 
   
 
 
Prix ​​total
{{ getFormattedBundlePrice() }}

{{ getRewardMessage() }}

Comment faire
Guide step %d
1.   Placez la doublure en tissu sur la table (environ 250cm). Placez la laine Mérino en lignes fines en motif de grille, plus courte à chaque extrémité d'environ 20cm par rapport à la doublure en tissu.
Guide step %d
2.   Pull out small wide wads of wool and fill in the chosen areas of the pattern. Place the wool in a staggered fashion and then add another layer of wool at right angles.
Guide step %d
3.   Moisten the wool with a sprinkler bottle containing warm water and soap.
Guide step %d
4.   Place a piece of tulle on top and press with both hands until all the wool is wet. Then hand-felt until the wool sticks lightly together.
Guide step %d
5.   Remove the tulle and place the end of the lining fabric down over the wool. Roll it together.
Guide step %d
6.   The rolled up fabric is held together with three or four elastic bands.
Guide step %d
7.   Finish the felting of the scarf in the tumble dryer at high heat or in the washing machine at 40°. Place a couple of large towels underneath the fabric during the felting in the washing machine or dryer.
Allez aussi explorer dans
Copyright © 2024 | CreaVea | 70 Avenue de Clichy | 75017 Paris | France | +33 800 90 91 01 | service-client@creavea.com