D'idées créatives

Une housse en feutre pour un iPad ou un iPhone

#v13739

Cette housse pour iPad peut être adaptée à un iPhone/autres types de smartphones. La technique est la même. Cousez un long merceau de feutre ensemble sur les côtés. Décorez le recto avec des graphiques dessinés à l'aide de stylos marqueurs. Laminer et coudre ensemble avec des liens pour la fixation.

#v13739
Sélectionnez des produits pour cette idée

{{ optionsGroup.label }}

{{ getVariantsButtonText(option) }}
   
 
 
   
 
 
   
 
 
   
 
 
   
 
 
Prix ​​total
{{ getFormattedBundlePrice() }}

{{ getRewardMessage() }}

Comment faire
1. Guide step %d Mesurez et découpez le morceau de feutre deux fois plus large que le iPad. Ajoutez 1.5cm sur les côtés - tout autour.
2. Guide step %d Write or draw on the inside of the laminating pouch following your imagination. Use Uni Posca markers.
3. Guide step %d Feed the laminating pouch through the laminator.
4. Guide step %d Measure and trim the finished laminating as required. Sew this onto the cover.
5. Guide step %d Use a sewing machine for sewing the laminated article onto one side of the felt. Then cut an incision in the middle, just above the sewn-on decoration. NB: the incision must match the width of the ribbon which will be attached later for pulling out and fastening.
6. Guide step %d Sew a long piece of ribbon onto the inside of the opposite side – in the middle, near the edge.
7. Guide step %d Use a “disappearing” pen for drawing a line to mark the stitching when sewing the sides together during the next step.
8. Guide step %d Use a needle and thread for sewing the sides together using overcast stitches.
Another variant Guide step %d A cover for an iPhone/smartphone.
Another variant Guide step %d -
Allez aussi explorer dans

Se connecter / Créer un compte

Copyright © 2024 | CreaVea | 70 Avenue de Clichy | 75017 Paris | France | +33 800 90 91 01 | service-client@creavea.com