Sculpture Houses

#v12311

Houses have been moulded using shape cutters which are pressed into a layer of sand on an paint tray. Stone and glass mosaic have been pushed into the sand and finally the casting compound is poured into the mould.

#v12311
Sélectionnez des produits pour cette idée

{{ optionsGroup.label }}

{{ getVariantsButtonText(option) }}
   
 
 
   
 
 
   
 
 
   
 
 
   
 
 
Prix ​​total
{{ getFormattedBundlePrice() }}

{{ getRewardMessage() }}

Comment faire
Guide step %d
1.   Sand is poured into a flat layer in the paint tray.
Guide step %d
2.   Place stones, sticks or mosaic in the tray and press down lightly into the sand.
Guide step %d
3.   Grease the mould with a little cooking oil and press it down lightly over the stones.
Guide step %d
4.   Mix the casting compound following the instructions on the packaging and pour it carefully into the mould. Dry for approximately 30 minutes.
Guide step %d
5.   Gently press out the shape. Paint the edges with diluted Plus Color Craft paint.
Allez aussi explorer dans
Copyright © 2024 | CreaVea | 70 Avenue de Clichy | 75017 Paris | France | +33 800 90 91 01 | service-client@creavea.com