Une décoration à suspendre en plastique thermo-rétractable avec un dessin de Noël

#v13968

Cette décoration à suspendre est faite avec du plastique thermo-rétractable sur lequel figure un dessin de Noël. Ce dernier est colorié aux crayons de couleurs, un trou est fait sur le haut du dessin et il est découpé. Il est ensuite rétrécit dans un four à 170 °C.

#v13968
Sélectionnez des produits pour cette idée

{{ optionsGroup.label }}

{{ getVariantsButtonText(option) }}
   
 
 
   
 
 
   
 
 
   
 
 
   
 
 
Prix ​​total
{{ getFormattedBundlePrice() }}

{{ getRewardMessage() }}

Comment faire
Guide step %d
1.   Colour in the design on the shrink plastic sheet using Lyra colouring pencils.
Guide step %d
2.   Cut it out leaving a space around the outline of the design.
Guide step %d
3.   Use revolving hole punch pliers for making a hole at the top. Remember that the hole will also shrink in the oven, so do not make it too small.
Guide step %d
4.   Place the hanging decoration on a baking sheet on top of a piece of baking paper. Shrink it in the oven at 170 °C.
Guide step %d
5.   The hanging decoration before and after shrinking.
Guide step %d
Another variant   As a gift tag.
Guide step %d
Another variant   As a pendant on a Christmas tree candle holder.
Allez aussi explorer dans
Copyright © 2024 | CreaVea | 70 Avenue de Clichy | 75017 Paris | France | +33 800 90 91 01 | service-client@creavea.com